VGA Extension Cable
- Male-to-Female Design: A low-cost, easy way to extend VGA cables without replacing the entire run.
- Five Angle Variants: Straight, Down, Up, Left, and Right 90° male connector allows tight installs behind wall-mounted displays.
- Supports full 1080P (1920×1080) with foil-and-braid shielding and dual ferrite cores for EMI suppression.
- Gold-plated contacts and corrosion-resistant pins guarantee reliable signal transmission after 1000 mating cycles.
- Non-Removable Female Screws: The female head screws are permanently attached, ensuring no screw is lost during field work.
- Compatible – Compatible with PCs, monitors, projectors, KVM switches, and HD-15 VGA devices.
- More Lengths: 0.5m, 1m, and 1.5m lengths in stock for extended excursions.
- B2B & OEM Ready: Factory-direct offering for bulk and beyond, including custom lengths, labeling, and packaging.
VGA Extension Cable: The Reliable Analog Video Extender for Professional AV & IT Installations
A common situation in professional AV & IT environments is the need to extend an existing VGA connection: moving a monitor across the conference table, reaching projectors from a distant podium, routing a KVM switch cable behind the server rack, and many more. That was exactly why we designed our VGA Extension Cable in the first place. This simply extends the length of any standard VGA cable, with no signal loss and with a male-to-female HD-15 connector arrangement.
Available directional types means we have a VGA solution for every installation scenario Straight VGA Extension Cable – general purpose extension Down Angle VGA Extension Cable – top mounted ports Up Angle VGA Extension Cable – bottom mounted ports Left Angle VGA Extension Cable – right-side ports Right Angle VGA Extension Cable – left-side ports All variants support 1080P Full HD resolution with foil + braid shield, dual ferrite cores built-in to help reduce EMI/RFI noise and are available in various lengths of 0.5m, 1m and 1.5 m[sic] respectively.
Direct Manufacturer & Factory. Over 20 Years of experience in providing Professional VGA Extension Solutions at Bulk and Wholesale Prices, B2B Full OEM/ODM.
Technical Specifications
| Parameter | Straight VGA Extension Cable | Down Angle VGA Extension Cable | Up Angle VGA Extension Cable | Left Angle VGA Extension Cable | Right Angle VGA Extension Cable |
| Product Type | VGA Extension Cable | VGA Extension Cable | VGA Extension Cable | VGA Extension Cable | VGA Extension Cable |
| Connector A | HD-15 Male (Standard) | HD-15 Male (90° Down Exit) | HD-15 Male (90° Up Exit) | HD-15 Male (90° Left Exit) | HD-15 Male (90° Right Exit) |
| Connector B | HD-15 Female (Standard) | HD-15 Female (Standard) | HD-15 Female (Standard) | HD-15 Female (Standard) | HD-15 Female (Standard) |
| Max Resolution | 1080P Full HD (1920×1080 @ 60Hz) | 1080P Full HD (1920×1080 @ 60Hz) | 1080P Full HD (1920×1080 @ 60Hz) | 1080P Full HD (1920×1080 @ 60Hz) | 1080P Full HD (1920×1080 @ 60Hz) |
| Supported Resolutions | SVGA, XGA, UXGA, WUXGA, Full HD | SVGA, XGA, UXGA, WUXGA, Full HD | SVGA, XGA, UXGA, WUXGA, Full HD | SVGA, XGA, UXGA, WUXGA, Full HD | SVGA, XGA, UXGA, WUXGA, Full HD |
| Shielding | Foil + Braid + Dual Ferrite Cores | Foil + Braid + Dual Ferrite Cores | Foil + Braid + Dual Ferrite Cores | Foil + Braid + Dual Ferrite Cores | Foil + Braid + Dual Ferrite Cores |
| Connector Plating | Gold-Plated Pins | Gold-Plated Pins | Gold-Plated Pins | Gold-Plated Pins | Gold-Plated Pins |
| Female Head Screws | Non-Removable | Non-Removable | Non-Removable | Non-Removable | Non-Removable |
| Standard Lengths | 0.5m, 1m, 1.5m | 0.5m, 1m, 1.5m | 0.5m, 1m, 1.5m | 0.5m, 1m, 1.5m | 0.5m, 1m, 1.5m |
| Key Feature | General-purpose extension | 90° exit for top-mounted ports | 90° exit for bottom-mounted ports | 90° exit for right-side ports | 90° exit for left-side ports |
| Application | Desktop, Conference Room | Wall-Mounted TV, Projector | Wall-Mounted Display | Rack, Tight Side Clearance | Rack, Tight Side Clearance |
Please click here to learn how to choose the VGA Extension Cable.
Products Show
Five Directional Variants for Better Routing
- VGA Straight Extension Cable: Will be used primarily for basic extension, where connector clearance is not an issue. Great for repositioning desktop monitors and connecting conference room tables.
- 90-degree angle variants (down, up, left, and right): These are special variants with a male connector at a 90-degree angle that change the cable exit right after connection. This approach addresses the well-known issue of insufficient space behind wall-mounted displays, projectors, and all-in-one devices. An angled connector allows you to run the cable flush along the wall or device surface and enables mounts to be flush on the wall itself, while reducing stress on the port.
Purpose-Built Extension Design
Unlike standard male-to-male VGA cables, our VGA Extension Cable has a male connector on one end (to connect to your existing VGA source cable) and a female connector on the other end (to connect to your display device’s VGA cable). This design enables extending an existing VGA installation rather than replacing the entire cable run.
Important Notes:
This is a male-to-female VGA cable, not male-to-male.
The VGA female head has non-removable screws.
Not 9-Pin VGA: This is for the 15-pin VGA Extension cable.
Superior Signal Integrity
Even though it is an extension cable, the signal quality is never compromised. Foil and braid shielding protects against electromagnetic interference (EMI) and radio-frequency interference (RFI). Two ferrite cores are integrated into the 1080P cable, and two OLED screens can operate stably with zero ghosting, even over an already long cable run.
Its gold-plated pins prevent oxidation and corrosion, ensuring reliable electrical contact over thousands of mating cycles.
Extremely Wide Compatibility
Our VGA Extension Cable works with most devices that have a standard 15-pin VGA port; it is also called RGB, DB-15, DE-15, HD-15, HDB-15, or D-sub 15.
- Computers & Laptops (VGA dock or native port)
- Monitors & Projectors
- KVM Switches
- Set-Top Boxes & Media Players
- Interactive Whiteboards & Touch Displays
PS: VGA doesn’t support audio. Audio requires a separate connection.
Applications
- Classrooms & Lecture Halls: Projector connection extension from the teaching lectern.
- Conference Room: You’ve moved some monitors from their original place across the table without rewiring.
- Use case: extend media player connections to remote displays, Digital Signage.
- KVM Switch Systems: Go beyond monitors in server rooms and data centers.
- 90 Degree Models: Solution for flush-to-wall mount installations
- Retail & Hospitality: Achieve point-of-sale display connections.
- Industrial Control Rooms: Obtain more connections to your HMI and monitoring display environments.
A VGA Extension Cable is a male-to-female HD-15 cable that increases the distance of an existing VGA connection without replacing the entire cable run.
A standard VGA male-to-male cable. This cable is a 15-pin male-to-female extension that you connect between the existing male VGA cable and the display device.
Straight, Down Angle, Up Angle, Left & Right Angle — Choose which to use based on how your port is set up and what the space will allow.
Supports up to 1080P Full HD (1920×1080 @ 60Hz), SVGA, XGA, UXGA, and WUXGA resolutions.
No, VGA is video-only. Audio requires a separate connection.
0.5m, 1m, and 1.5m standard lengths and special lengths are available for quantities.
Those screws on the VGA female head do not come out; they are fixed and stuck there forever.
This is a 15-pin VGA extension cable, not a 9-pin-supported cable.
That is correct: there are gold-plated pins in every pin to minimize corrosion and ensure the best possible signal transfer.
Shielding at 96% / Foil + braid incorporated dual ferrite cores for the highest EMI/RFI protection.
Use a 90-degree variant when there is little space behind the device, such as with wall-mounted TVs and projectors, or in an all-in-one machine.
Yes, but only for B2B clients qualified for samples — because we offer samples at scale.
Yes, the signal is fully compatible.
For permanent in-wall installations, we suggest our Heavy Duty In-Wall VGA Cable CL2 rated.
Absolutely. We are a factory and get up to 20% off most wholesale quantities.
Our windows and most standard non-custom bulk orders will ship from our warehouse within 7–10 business days of the order date. On the other hand, specific OEM orders that require bespoke manufacturing processes and personalized approaches are naturally capped per shipping date, with slightly longer operational lead times totaling 15 to 20 business days, ensuring the best possible production before a final order.
Yes, we can easily meet the aforementioned requirement and design in special dimensions for our quality VGA Extension Cable, manufactured with custom lengths to meet tailored logistical needs for bulk wholesale orders.
Yes, all the pins are gold-plated for corrosion resistance and optimal signal transfer.
Warranty terms specific to B2B purchases are available on request.
We accept T/T (Bank Transfer) and PayPal. Payment is generally due in full in advance for new customers.
We are extremely proud to provide integrated OEM and ODM services optimized for your business needs. These manufacturing services are as extensive and diverse as they are bespoke, including precision lengths for any cable type, custom labels and packaging, and even more tailored connectors built to your unique technical requirements.
Related Products
Client Solution Sharing: KVM Monitor Extensions in a Trading Floor Restoration
Problem: Gap Between New Desk Configurations and Current Floor Ports
A financial services firm that was remodeling its trading floor from fixed cubicles to an open-plan environment with hot-desking installations for flexible trader workstations. Before this, there were floor-mounted VGA ports that connected to a centralized KVM matrix system. Yet the new desk positions were 1–1.5 m further from the floor ports than their original locations. So, the IT team wanted to extend the monitor connection to all traders—without replacing the entire in-floor cable structure, which would be costly and very disruptive. They needed a good (hopefully, as per expense) VGA male-to-female extension cable that could fill the gap/breach while handheld, from 1080P videos at all times, for the high-resolution, critical Financial info displays. Also, the ports on the floor were way too close to the power cabling, so EMI suppression was very important.
A Bespokecable Solution: Leveraging Shielded VGA Extension Cables with Ferrite Cores
For this installation, we provided a bulk order of our Straight VGA Extension Cable (1.5-meter length). The HD15 female-to-female configuration allowed the existing VGA monitor cable from each trader’s desk to plug straight into the extension’s female display end, while the Male port connected to the floor port. Combined foil and braid shielding with integrated dual ferrite cores easily surpassed the stringent requirements imposed by electromagnetic interference sources throughout the entire enclosure, far exceeding those from power cabling run through the floor raceways. The pin connections were gold-plated, preventing corrosion from moisture at low humidity levels in the lower floors of a building. The IT team liked that the SVGA extension cable was plug-and-play and required no tools or configuration; they just plugged it in and extended the connection.
The Influence: Effortless Hot-Desking Implementations with No Signal Troubles
Only one weekend, the extension cables were connected to 48 workstations. By Monday morning, when the system came online for business as usual, every display was showing a stable 1080P image with no flickering. The facilities team had not logged a single service ticket related to bad cables over the next eight months of daily use across three trading shifts. This represents a cost savings of around $12,000 over pulling new in-floor cable runs, explained the IT director, who deployed the solution using a VGA extension cable with a ferrite core. Traders were able to move between desks without any video connectivity issues, so the full benefits of a hot-desking layout could be realized.
B2B Takeaway for Corporate IT, Financial Services, and KVM System Integrators
This case is an example where extending with a VGA monitor cable is sometimes the cheapest and least disruptive way to adapt existing analog video infrastructure to workspace changes. The lessons are clear for B2B clients in financial services, corporate IT, government, and any other organizations with VGA floor ports:
- In this type of scenario, a VGA male-to-female cable can preserve previous investments in our infrastructure: if you have VGA cables already installed in the floor or walls and you want to change the furniture configuration, bringing that signal back at low cost, while preserving that infrastructure, is possible.
- A VGA extension cable with a ferrite core should be necessary when used in raised floors and cable raceways shared with power cables; shielding is critical in dense environments.
- Simplicity Reduces Deployment Period: The plug-and-play nature of an HD15 male-to-female VGA cable enables quick workspace reconfiguration with minimal technical expertise required.
A professional-grade, well-shielded SVGA extension cable turns an infrastructure constraint into a flexible way to sidestep the costs of continuously shifting workplace dynamics.
A Professional Guide for AV & IT Extenders
When an existing VGA run comes up just a little short—as is often the case when extending a projector connection from a teaching podium, lengthening KVM system monitor tail in a crowded server rack, or repositioning a display across the conference table—for B2B AV integrators, IT administrators and KVM system technicians alike—VGA Extension Cable (HD15 Male to Female) may just be the ultimate solution. The assembly features a male VGA plug on one end (for a source cable or device port) and a standard female VGA port on the other (for a display-side VGA plug). This guide focuses on best practices for installing our Straight and 90° (Down/Up/Left/Right) VGA Video Extension Cable variants—some of which include an integrated EMC ferrite core to improve EMI suppression.
Step 1: Verify You Have The Correct Type Of Cable
- VGA Extension Cable – Male to Female: Similar to a standard VGA extension cable, it extends an existing VGA cable. This is not a VGA-to-VGA (male-to-male) cable.
- Check Pin Count: It is a 15-pin HD-15 connector that connects V…. This cable is not for VGA/SVGA.
Select the Right Angle:
- The way to secure the overall working from straight-to-straight VGA Extension Cable: Common-use desktop or tabletop extensions.
- Down/Up/Left/Right Angle VGA Extension Cable: Use it when you have limited space behind the wall where the display is mounted, in an equipment rack, or between a projector and a ceiling. The male-angled end bends the cable directly along its surface, allowing it to sit flush against the attached device.
- Length selection: The lengths available for common stock include 0.5m, 1m (similar to VGA Extension Cable 3ft), and 1.5m (≈VGA Extension Cable 6ft). Please reference our standard VGA-to-VGA series—if you require a full source-to-display cable rather than a short extender, we also offer our 10ft and 25ft VGA Extension Cables.
Step 2: Turn off the power & series connection
- Power Down Both Machines: Power off the source (e.g., PC, KVM switch, media player) and the display/projector before connecting to avoid electrostatic discharge damage or EDID misreads.
- Connect Male End to Source-Side VGA Cable — The male HD-15 connector on the extension plugs into the female end of your existing source cable or directly into a device’s VGA output port.
- Insert fully & tighten: Push straight in until the metal shell is flush. Finger-tighten the two thumb screws to prevent accidental pull-out, especially in classrooms or racks that may move.
- Insert Display-Side VGA Cable into Female: Attach a female HD-15 (VGA) port to the monitor’s or projector’s cable. And also tighten the screws of its thumb.
- Caution: The screws on the female heads are non-removable by design to prevent them from getting lost in the field.
- Route Extension cable: Uses a short length to provide a service loop behind equipment. To reduce strain, in 90° options only, ensure that the exit angle follows your designated path into a wall or rack.
Step 3: Switch on and Check for Receiving Signals
- And don’t forget to switch on the display or projector first, then power up the source.
- Select the input (VAG or RGB) on the screen.
- Change the resolution to any supported one (1920×1080, 1680×1050, 1280×1024, or even 1024×768)
- If that is the case, you can reseat the VGA at both ends — meaning from the graphics card and the motherboard. And when you’re close to an AC power line, use the double-ferrite type. When extending a very long existing run (> 15 m total) and signal attenuation is a problem, we must resort to an active booster — or use an entirely new, longer VGA-to-VGA Cable.
Step 4: Troubleshooting Common Issues
Some black screens (appear as snow or a blank screen) are usually caused by a faulty cable or an open circuit; reseat the HD-15 connector at both ends, and make sure “VGA” is the selected input. Ghosting/shadow images indicate EMI target rails away from power cables; you may have ordered a Foil + Braid shield version with ferrite cores. If the pin is bent in either, the extension’s male plug or otherwise, then you’ll see that colour missing (usually red or green); try to carefully straighten with tweezers if you can — if broken; replace; It could be that you start to notice flicker at high resolutions but not marginal runs—attenuation due to a very long cable run (not as sure about that last one unless you test with heavy-gauge, low-loss coax).
Pro Tips for B2B Installers
- Label Short Extenders: For KVM racks containing multiple monitor tails, label each VGA Video Extension Cable (e.g., “BC-VVB007”) to speed up future tracing.
- Carry Angled Spares: Have a Down-Angle and Right-Angle 1m extender in your kit for wall-mount TV/Projector service calls.
- Plan Full Runs When Possible: If the existing cable is <3m and you need +5m, removing it entirely and replacing it with a single VGA monitor cable or a flat VGA cable will eliminate connection points.
- Slim or 90 Degree: Use Slim or 90° for Tight Panels — In control enclosures where even a straight extender is too bulky, or when you need to get into a super-tight space (like inside an AV rack), use our Slim VGA Cable or a 90-degree VGA plug.
Related Professional Connectivity Solutions
- Standard round VGA interconnect (e.g., between source & display or for longer custom runs).
- VGA Monitor Cable — High-quality shielded VGA cable with purple/blue boot for ghost-free monitor connections.
- Heavy Duty In-Wall VGA Cable — CL2-rated, ultra-thin in-wall VGA package.
- Super Flat VGA Cable — Ultra-thin (3 mm) flat profile for under-carpet and baseboard AV runs.
- Slim VGA Cable/90 Degree VGA Cable — Space-saving connector solutions for cramped enclosures and flush-mount displays.
- Optical Audio Cable/High-definition Multimedia Interface – Add a digital audio feed or upgrade to a digital-screen television display via a separate video feed, separate from the analog VGA.
B2B buyers and field technicians take these steps to keep the VGA Extension Cable running with stable, ghost-free 1080P analog video while preserving cable investments and B2B direct quality & support. To speak with the factory about OEM branding, custom lengths, or bulk pricing for VGA extension assemblies.
Do you need immediate shipment of a 6ft VGA Extension Cable, a 10ft VGA Extension Cable, or an angled VGA Video Extension Cable? Get a quote for your volume today.
