90 Degree VGA Cable
- Four Angle Directions: Down, Up, Left, Right 90-degree exits to fit any device port orientation.
- Flush Wall Mount Enablement: Removes connector protrusions, allowing displays to sit flush against a wall.
- Full 1080P Support (All): This precisely constructed cable consistently delivers a clear, high-definition video output of 1920 x 1080.
- EMI/RFI Suppression: Dual ferrite cores of appropriate lengths prevent occasional ghosting, ensuring a rock-steady video signal.
- Pro-Spec Strain-Relieved Design: 90-degree molded boot protects the connector junction from bending stress and damage.
- Gold-Plated Contacts: Our advanced connector pins are made with an exceptionally tough, highly corrosion-resistant process that consistently delivers a fully uninterrupted signal while maintaining outstanding electrical conductivity over thousands of mating cycles throughout a long service life.
- Available in Multiple Lengths: 1m to 10m for wall-mount, projector, and rack.
90 Degree VGA Cable — Designed specifically for low-profile wall-mounted displays as well as very constricted, tight-space installations.
One of the most stubborn challenges in the professional AV integration realm is cable routing behind wall-mounted displays, projectors, and all-in-one devices—where millimeters often matter. Standard straight VGA connectors stick out from the back of the display far too much, creating a gap between the wall and the TV or putting signal-destroying pressure on cable bends over time. Our 90 Degree VGA Cable is specifically designed to address this precise issue. These cables allow clean, compact installations in the tightest spaces by redirecting the cable exit angle to 90° from the initial port.
We even have four directional variants to suit any port direction needed, such as Down Angle VGA Cable, Up Angle VGA Cable, Left Angle VGA Cable, and Right Angle VGA Cable. Every variant comes in lengths ranging from 1m to 10m, with 1080P Full HD resolution, tinned copper conductors, multi-layer foil-and-braid shielding, and ferrite cores for EMI/RFI suppression. Designed a 90-degree connector design to help eliminate sharp bends in cables, reduce strain on the port, and enable displays to be flush against walls.
With 20 years of practical experience in the industry as a direct manufacturer and factory, we specialize in designing highly customized VGA connectivity solutions. Alongside these premium components at extremely competitive wholesale and economically beneficial bulk pricing tiers, we are devoted to providing comprehensive, end-to-end Original Equipment Manufacturer (OEM) and Original Design Manufacturer (ODM) services specifically designed to serve both the unique needs of our global network of Business-to-Business (B2B) clients located throughout the world.
Technical Specifications
| Parameter | Down Angle VGA Cable | Up Angle VGA Cable | Left Angle VGA Cable | Right Angle VGA Cable |
| Product Type | 90 Degree VGA Cable | 90 Degree VGA Cable | 90 Degree VGA Cable | 90 Degree VGA Cable |
| Connector A | HD-15 Male (90° Down Exit) | HD-15 Male (90° Up Exit) | HD-15 Male (90° Left Exit) | HD-15 Male (90° Right Exit) |
| Connector B | HD-15 Male (Standard Straight) | HD-15 Male (Standard Straight) | HD-15 Male (Standard Straight) | HD-15 Male (Standard Straight) |
| Max Resolution | 1080P Full HD (1920×1080 @ 60Hz) | 1080P Full HD (1920×1080 @ 60Hz) | 1080P Full HD (1920×1080 @ 60Hz) | 1080P Full HD (1920×1080 @ 60Hz) |
| Conductor Material | Tinned Copper | Tinned Copper | Tinned Copper | Tinned Copper |
| Shielding | Foil + Braided Mesh + Foil (Multi-Layer) | Foil + Braided Mesh + Foil (Multi-Layer) | Foil + Braided Mesh + Foil (Multi-Layer) | Foil + Braided Mesh + Foil (Multi-Layer) |
| Ferrite Cores | Dual Ferrite Cores (on applicable lengths) | Dual Ferrite Cores (on applicable lengths) | Dual Ferrite Cores (on applicable lengths) | Dual Ferrite Cores (on applicable lengths) |
| Connector Plating | Gold-Plated Pins, Nickel-Plated Shell | Gold-Plated Pins, Nickel-Plated Shell | Gold-Plated Pins, Nickel-Plated Shell | Gold-Plated Pins, Nickel-Plated Shell |
| Jacket Material | Flexible PVC | Flexible PVC | Flexible PVC | Flexible PVC |
| Standard Lengths | 1m, 1.5m, 3m, 5m, 8m, 10m | 1m, 1.5m, 3m, 5m, 8m, 10m | 1m, 1.5m, 3m, 5m, 8m, 10m | 1m, 1.5m, 3m, 5m, 8m, 10m |
| Key Feature | 90° downward cable exit for top-mounted ports | 90° upward cable exit for bottom-mounted ports | 90° leftward cable exit for right-side ports | 90° rightward cable exit for left-side ports |
| Application | Wall-mounted TVs, Ceiling Projectors | Floor-standing Displays, Podiums | Rack Equipment, Tight Side Clearance | Rack Equipment, Tight Side Clearance |
Learn more about how to choose the 90 Degree VGA Cable.
Products Show
Four Directional EndProtector Variants for Any Port Orientation:
- Down-Angle VGA Cable: Perfect for equipment with VGA ports on top (like many projectors and some monitors). The cable runs downward and connects to a wire that runs vertically along the wall or the device body.
- Up-Angle VGA Cable: Ideal for devices with bottom-mounted ports (typically on wall-mounted displays). The cable then exits upward and can be routed to either the ceiling or the upper cable management.
- Left-Angle VGA Cable: For devices with right-side ports. The cable extends to the left and runs horizontally along the device’s edge.
- Right-Angle VGA Cable: Designed for the left-side port. The cable exits on the right, retaining a tidy, low-profile appearance.
The 90-Degree Advantage: Solving the Space Constraints
The standard VGA connectors will extend directly from the device port, meaning that any object (the screen or other devices) with close clearance behind the display or projector is unlikely to connect flush with a standard VGA connector. This forces the display to sit a few inches away from the wall in wall-mounted installations, leaving an unsightly gap and potentially compromising mounting stability. The 90 Degree VGA Cable we have solves this problem by routing the cable at a right angle, allowing it to run flush with the wall or device surface immediately after the connection.
Better Signal Integrity for Long Runs
Even with connectors bent at 90 degrees, we supply a very high-quality extension cable, and our 90 Degree VGA Cable comes as standard. The tinned copper conductors offer optimal conductivity and corrosion resistance, and the multi-layer shielding (2 x foil + braided mesh + 1 x foil) blocks EMI & RFI interference. Dual ferrite cores help filter high-frequency noise for absolutely stable, ghost-free 1080P video transfer over runs up to 10m.
Support for Full Canvas Edge-Based Extended/Makeover Modes
We support standard VGA display modes on our cables:
- Mirror Mode: Mirrors the laptop or PC screen to the external display, useful for presentations and collaborative projects.
- Extended Mode: This mode simply spans your desktop across two screens, giving you more workspace for games or whatever multitasking you may need.
Robust Construction for Permanent Installation
The 90° connector has a molded strain relief that protects the cable-to-connector junction from bending stress at the most common point of failure for an angled cable. The flexible PVC jacket for standard use is a tough protective cover that resists the grueling demands of installation routing, wall-cavity pulls, and conduit runs alike. Gold-plated pins help resist oxidation and ensure reliable electrical contact over thousands of mating cycles.
Applications
- Wall-Mounted TVs & Displays: Allow for flush wall mounting with no connector protrusion.
- Ceiling-Mount: This enables neat cable runs across the ceiling.
- Digital Signage Kiosks Space-saving connection in tight enclosure interiors
- Rack-Mounted Equipment: Optimized cable management in high-density racks.
- Conference Rooms: Cables are a clean, professional choice for podium-to-display connections.
- Retail & Hospitality: Hidden and unobtrusive cable routing lines for customer-facing displays.
- Industrial Control Panels: Space-saving connections for tight control panel enclosures.
A 90 Degree VGA Cable has a right-angle connector that bends the cable exit perpendicular to the port, enabling installation in space-restricted areas where a straight connector will not fit.
Down Angle, Up Angle, Left Angle, and Right Angle—depending on your device’s port facing up/down/left/right.
To connect a cable that will run downward (the VGA port is at the top of the device; programmers typically use this connection), use Down Angle.
Use an Up Angle when the VGA port is towards the bottom of the device (common on wall-mounted displays), and you want the cable to run upward.
Carefully designed to meet super strong support for a maximum display resolution of up to 1080P Full High Definition at the ultimate clarity of a pixel output frequency of 1920×1080 pixels running at 60Hz.
The answer is no. 18 months of in-depth research and development have led us to our custom-crafted 90 Degree VGA Cable, expertly engineered with multi-layer shielding for uncompromised signal integrity, complemented by built-in ferrite cores designed to selectively and efficiently reduce Electromagnetic and radio-frequency interference (EMI/RFI).
We have a wide selection of standard lengths (1m, 1.5m, 3m, 5m, 8m, and 10m) to meet common installation needs, and we can also make custom lengths on demand that fully suit the requirements of bulk-order customers.
Yes, indeed, we can help you with that. Since we run in-house as a true factory, we have the unparalleled ability to offer extremely deep cash discounts on large-quantity orders.
For bulk orders placed through our regular delivery process, we prepare the order, and the minimum time required for dispatch to your pick-up address is approximately 7 to 10 business days. On the other End, for specific custom-made-to-order (OEM) ship orders, we will Process Accordingly and ship your fully made goods in approximately 15 to 20 working days.
Yes, this is very true, and there are many manufacturers with the expertise to produce 90 Degree VGA Cables exactly as requested, in custom lengths, especially for large bulk orders.
Absolutely, they are gold-plated throughout. This highest level of QA method applies to all discrete pins, and this design decision is intentional because it provides excellent protection against long-term corrosion while optimizing the reliability of both signal and power delivery.
The whole shielding structure consists of an outer cover or lace made from a foil layer, vigorously combined with an extremely finely woven net, and rigidly strengthened by another covering of foil layers. This multi-layer structure is specifically designed to fully meet stringent EMI and RFI regulatory compliance requirements.
The VGA standard is definitely video-only. As a result, any audio playback that may accompany this fundamentally requires building an entirely new, dedicated audio path.
So yes, this would be an easy way to execute Mirror mode and Extended Mode, and is very helpful and works like a charm for any kind of visual presentation through your job/profession or academics as well!
Well, yes, most definitely; actual samples are on the shelf for your formal request, reserved solely for our qualified B2B clients to assess before you plunk down a large order commitment.
The exceedingly limited specific and technical warranty terms for all Business-to-Business (B2B) orders are readily available upon request in a formal manner.
For permanent in-wall runs, we offer the Heavy Duty In-Wall VGA Cable with CL2 approval.
We accept payment via T/T (Telegraphic/Bank Transfer) or PayPal! In addition, for new customers establishing their first relationship with us, payment is generally required in full before delivery of the order.
The answer is yes: it works perfectly and smoothly with any standard VGA KVM switch currently on the market.
Yes, provide detailed customization for almost all specs: overall length (exact), product labels, protective box packing, and connector configurations. Essentially complete OEM & ODM services.
Related Products
Client Solution Case Sharing: Complete Wall-Mount Displays embedded in the Office of the Corporate Executive Board
Problem: Unsightly Gaps Caused by Bulkier Straight VGA Connectors Hiding Behind Wall-Mounted Screens
Case study: A multinational corporation was updating its executive boardroom with four 65-inch 1080P displays, to be installed flush with the wall for a clean, modern look. On the bottom edge of the displays, about 2 inches from the wall surface, were VGA input ports. The AV integrator announced that it had connected standard straight VGA cables, only to find the connectors sticking out almost an inch, causing the displays to sit too far from the wall and resulting in a massive gap—an issue unacceptable for this project. Also, the hard-bend angle required to snake the cable downward put a lot of stress on the port and set the stage for potential long-term reliability issues. This design requirement presents a significant challenge, especially since their design team wanted the displays mounted flush with the front of the cabinets and required stable 1080P video signals without degradation over a low-profile VGA cable.
The Bespokecable Solution: Using Up-Angle 90 Degree VGA Cables
We provided four 90 Degree Up-angle VGA Cables (3 meters) for the installation. The bottom-mounted ports are perfectly matched to a 90-degree upward exit on the cable, so right after connecting, you can run the cable straight up behind the display and then back down through the wall cavity. This eliminated the connector protrusion, allowing the displays to be flush with the wall. The oversized tinned copper conductors and multi-layer foil-plus-braid shielding provided uncompromised 1080P video drive, even at the tight bend radius at the connector. The three-meter cables are terminated with ferrite cores that eliminate electromagnetic interference (EMI) from the dimmers and wireless equipment in the room, resulting in an image without ghosts or flickering.
The Result: Flush Fit Install, No Signal Problems & Client Approval
Within a day of the administration, it was completed. The mounted displays sat flush with no gap, fulfilling the design team’s visual goals. The design of this cable reduced strain on the display ports (right-angle VGA monitor cable), and a protective junction also helped prevent tight bending by providing molded strain relief. After more than six months of everyday use in executive meetings, the boardroom saw zero video issues: no flickering, no ghosting, and no signal dropouts. According to the facilities manager, the 90-degree SVGA cable solution with a male connector was a very inexpensive alternative to requiring displays to have different port configurations or to installing a custom cable recess in the wall for each display.
B2B Conclusion for Enterprise AV Integrators and Design-Build Companies
As important as the electrical specification of cabling is to the installation of wall-mount displays, so too is the connector angle. The lessons stem from B2B clients for corporate AV, hospitality, retail, and residential integration:
- Angled Connectors for Flush Mounting: A VGA port located on the bottom or side edges against the wall makes an angled cable necessary, enabling practical and convenient flush-mount displays that use a 90-degree male-to-male VGA cable.
- Pick the Right Direction: Up Angle is perfect for bottom mounts; Down Method works well with upper mounts; Left and Right angles can be used in side ports.
- Shielding is Crucial: In fact, the 90-degree VGA cable for a wall-mounted TV should also include adequate shielding and ferrite cores to handle electrically noisy commercial environments and maintain signal integrity in the short run.
A purpose-engineered, low-profile VGA cable with a right-angle connector turns a typical installation hurdle into an elegant, professional solution, completing both the project’s technical performance and its aesthetic vision.
Cable VGA 90-degree installing A Professional Guide to Flush-Mount & Tight-Space AV Installations
One of the top reasons why wall-mounted display installations fail for B2B AV integrators, low-voltage contractors, and corporate IT teams is that a standard VGA connector protrudes enough to prevent the screen from lying flat against the wall or, in the worst-case scenario, to strain the brittle HD-15 port. The solution is our 90 Degree VGA Cable (also referred to as a 90 Degree Connector VGA Cable), which automatically reassigns the cable exit to a right angle immediately after it leaves the connector. This guide describes the correct selection and installation of all four directional types—down-angle, up-angle, left-angle, and right-angle VGA cables— to ensure a clean, code-compliant analog video installation with a more stable signal.
Step 1: Pick the Right Angle Based on Your Device Port Position
Check the VGA port location of the display or source device before you install the cable:
- Down Angle VGA Cable: Used when the VGA port is on top, which is typically found on ceiling projectors or some monitors. The cable leaves downward, close to the device’s body or the wall.
- Up-Angle VGA Cable: Use for bottom-mounted VGA ports (common with wall-mounted TVs/displays). The cable runs out of the top so that it can be directed behind the screen and down into the wall cavity.
- Left Angle VGA Cable: When the VGA port is on the right side of your device, and the cable also exits to the left.
- Right-Angle VGA Cable: Use when the VGA port is on the left and the cable exits on the right.
If you opt for the Right Angle VGA Cable, or a left- or up-combo, you’ll avoid having to jam (and potentially damage) a straight connector into a tight fit, which mechanically stresses the port.
Step 2: Reasonably route the cable (with minimum bend stress)
- While a 90° connector eliminates the first bend, lay the cable body with a minimum bend radius of ~5× its diameter (often > 28 mm for round VGA jackets) to protect the RGB coaxial pairs from being crushed.
- Cable ≥6 inches from AC power lines for in-wall or behind-wall runs. For permanent, long runs in walls requiring a CL2/CL3 rating, we also offer our Heavy Duty In-Wall VGA Cable as a reference or alternative.
- Our flexible PVC jacket on the VGA Cable with a 90 Degree Connector allows routing directly behind a flush-mounted display’s carrying case, where space is typically tight.
Step 3: HD-15 (VGA) Ends Connect & Secure
- Power Down Both Devices: Switch off the source (PC, media player, KVM) and the display/projector before connecting.
- Insert the Angled Connector: The HD-15 plug has a trapezoidal, keyed shell (with the wide side on top). Rotate it in the appropriate direction as needed, then align it with the port. The 90° boot should point in your pre-chosen Down/Up/Left/Right direction.
- As context: to ensure the connection works properly, it needs to be fully inserted—push the plug straight into the port with unhurried, uniform pressure until the outer metal shell seats entirely flush against the receptacle. At this exact moment, you should definitely feel a strong, positive stop, indicating we are fully engaged. Importantly, partial or incomplete seating is the leading cause of missed colors, visual inconsistencies, and annoying screen flicker, so pay attention to this part!
- Finger-Tighten Thumb Screws: Both UNC #4-40 thumb screws should be finger-tight. This prevents accidental disconnection in public places and vibration in plant environments.
- Connect Opposite End: The opposite end has a standard straight HD-15 male connector. So plug it into the source device and also tighten up its thumb screws.
Step 4: Power on & Signal Test
- Start with the display and then the source.
- Switch display in “VGA”/”RGB” input mode
- While you are in setup, set the display resolution back to the supported modes for VGA (1920×1080, 1680×1050, 1280×1024, and 1024×768).
- If the image flickers or ghosts, reseat both ends. Run confirmation of dual-shield + ferrite version on longer runs in electrically noisy regions. For ordinary desktop use, where a 90° connector is not required, you could instead specify one of our VGA-to-VGA Cables or VGA Monitor Cables.
Step 5: Troubleshooting Common Issues
And if you encounter a blank screen on your monitor, it usually indicates a straightforward issue with improper cabling or an input source. Just properly unclip and reseat both ends of the HD-15 connector, then ensure you select the proper VGA Input channel for that device. EMI indicated by ghosting or shadow images, re-route away from AC power, and check that you are using the foil+braid shielded version. No color (red/green/blue present) = bent pin. Check it, and if possible, try straightening it with tweezers. Then replace the cable if it’s broken. Flicker When Gaming at High Res with long runs is a sign of Signal Degradation: Use a heavy-shielded cable or shorten your Run.
Pro Tips for B2B Installers
- Pre-Label Cables: For multi-display boardrooms, label both ends (e.g., BC-VVB006-D) before cable dressing.
- Store Spares: Include a Down-Angle VGA Cable and an Up-Angle VGA Cable in service kits for on-location installations behind wall-mounted screens.
- Phase Digital Upgrades: Use a conduit sized for both this angled VGA cable and an HDMI 2.1 or DisplayPort Cable to make future digital upgrades without the need to open walls; just wave a magic wand, and the new cable will appear!
- Flat or Slim alternatives: If the problem is under-carpet coverage rather than port clearance, consider our Flat VGA Cable or Slim VGA Cable.
Related Professional Connectivity Solutions
- VGA to VGA Cable — Standard round VGA interconnects, often for general-purpose desktop and short-run applications.
- VGA Monitor Cable — This very high-quality VGA connectivity solution is meticulously constructed with a fully shielded cable and features a unique purple/blue boot, specifically designed to eliminate annoying ghosting artifacts & ensure your monitor displays the best possible picture.
- Heavy Duty In-Wall VGA Cable — This toughened, solid-structure CLR2-rated, field-calibrated, close-connect VGA cable was specially crafted to withstand the arduous demands of construction use in durable, permanent A/V installations.
- Flat VGA Cable — Ultra-thin 3mm flat profile for under-carpet and baseboard AV runs
- Slim VGA Cable — Ultra-compact connector designed for control panels and space-constrained enclosures.
By this standard, B2B buyers and field techs can trust that the 90 Degree VGA Cable/VGA Cable with a 90 Degree Connector produces a steady, ghost-free 1080P analog image AND allows flush wall-mount installs — authorizing factory-direct quality & B2B support as good to go. Contact Our Factory for bulk pricing, custom lengths, or to request this product with your branding as an OEM production run.
Order a Down Angle, Up Angle, Left Angle, or Right Angle VGA Cable, ready to ship today. Contact us today for a volume quote on your project.
