DVI to DisplayPort Converter Cable
Keep a working DVI-equipped computer when you move to a DisplayPort monitor. The BC-VDC009 DVI to DisplayPort Converter Cable actively converts the digital video signal between the two interfaces. It provides a practical display-upgrade path for workstations and equipment systems that need to keep their host connection unchanged.
Choose BC-VDC009-C for a direct male-to-male cable connection, or BC-VDC009-A with a DisplayPort female socket when you want to use a separate, replaceable DP cable. External USB power supports the conversion electronics. Our factory can review the required assembly, cable route, and identification for standard supply or a custom OEM project.
- One-way video conversion: DVI host → DisplayPort display
- BC-VDC009-C: DVI male to DisplayPort male
- BC-VDC009-A: DVI male to DisplayPort female
- Standard cable length: 1.5m
- Integrated active chip with external USB power connection
- Cable or adapter format to suit installation and service access
Keep the Host. Upgrade the Display Connection.
A monitor replacement should not automatically mean replacing a working computer. BC-VDC009 provides an active digital connection between a DVI host and a DisplayPort screen, making it a practical option for workstation refreshes, equipment maintenance, and display integration projects.
Choose the complete cable when a 1.5m direct connection suits your layout. The adapter format gives you a separate DisplayPort cable connection when installation or service access calls for it. As a cable manufacturer, we support standard products alongside project-specific requirements; tell us how you’ll route, identify, and pack the assembly so the quotation reflects your installation.
| Item | Specification |
|---|---|
| Product series | BC-VDC009 |
| Signal direction | DVI source → DisplayPort display |
| Conversion | Active, built-in chip |
| Cable model | BC-VDC009-C, DVI male to DisplayPort male |
| Adapter model | BC-VDC009-A, DVI male to DisplayPort female |
| Standard cable length | 1.5m |
| Power connection | External USB power supported |
| Project specification | State equipment models, target display mode, installation requirements, and quantity when requesting a quote |
Choose a Direct Cable or Converter Adapter

P/N: BC-VDC009-C
Connect a DVI host directly to a DisplayPort monitor with this 1.5m male-to-male active converter cable. The compact design keeps the connection simple, while external USB power supports the converter electronics. Share your equipment details for a factory quotation matched to your project.

P/N: BC-VDC009-A
Choose this DVI male-to-DisplayPort female adapter when your installation uses a separate DisplayPort cable. Active conversion connects the DVI source to the display, with external USB power supplying the converter electronics. Send your cable route and equipment details so we can help specify the assembly for your project.
Active Electronics for the Correct Conversion Direction
A DVI output and a DisplayPort input use different signal formats. The conversion chip bridges that difference; this is more than a cable with two different plugs. BC-VDC009 is intended for DVI-equipped hosts feeding DisplayPort displays. This clear direction helps purchasing and installation teams avoid ordering the common reverse-direction DP-to-DVI product.


A Clear Connection Plan Before Installation
Route the DVI plug to the computer and the DisplayPort end to the screen. Include the USB power connection in the installation plan so the converter can be powered without stretching a branch lead across the enclosure. For the adapter version, allow room for the separate DisplayPort cable and its connector. A quick photo of the rear panels can help us review the required format.
Check Clearance, Not Just Cable Length
The space behind a computer or display must accommodate the connector body and the cable bend. Use the cable model’s dimension drawing to check the DVI shell, DisplayPort plug, and nearby obstructions. Share a mounting sketch if your system sits close to a wall or inside an enclosure; practical routing details help define a more useful custom requirement.

No. This converter needs a digital DVI source signal. A socket that physically accepts the plug is not enough when the equipment supplies only analog video. Check the host specification or send us the equipment model so we can review the required conversion path.
These models provide one display connection. Don’t specify them as a dual-monitor splitter or an MST hub. Tell us about a multi-display requirement before selecting the connection hardware.
Check that the DVI end is connected to the host, the monitor is set to its DisplayPort input, and the USB power connection is present. Then check that the host is sending a supported display mode. Start with a direct connection while troubleshooting, without extra switches or adapters.
A KVM adds another device to the signal path, so check the complete combination rather than assuming compatibility based on connector names. Send the KVM model, source, and display details, including any switching or wake-from-sleep requirements.
Yes. We offer standard products and can review custom assembly requirements. Share the quantity, routing needs, and any labeling or packaging preferences; we’ll define the final configuration and commercial terms in the quotation.
Specifying a DVI-to-DisplayPort Connection for Your Project
Start with the equipment you want to keep. If a working computer has a digital DVI output and the replacement monitor accepts DisplayPort, an active DVI-to-DP converter can bridge the two interfaces. For an integrator or maintenance team, that can make a display change possible without redesigning the host connection.
Choose the Assembly Around the Installation
A complete male-to-male cable is convenient when the host and display sit within the standard 1.5m route. It gives the installer one defined assembly to identify and connect. A male-to-female converter adapter is useful when the display cable is routed separately or needs to remain replaceable during servicing. Consider access to the joints, cable support, and available space before choosing between the two.
For a connection that remains DVI at both ends, browse our DVI cable options. Conversion is useful when the interfaces differ; it is not a substitute for selecting the correct native cable where both devices already share an interface.
Specify the Display Mode as a Complete Requirement
Tell us the resolution and refresh rate you actually need, together with the host and display models. A connector’s pin count or a monitor’s maximum advertised resolution does not by itself establish the mode available through an active converter. The source output, conversion electronics, and screen must agree on the same timing. This is particularly useful when an installed system uses an unusual industrial display mode.
For a rollout, include cold startup, waking from sleep, and the normal software workload in your equipment trial. A connection that is easy to reproduce in the intended system is more useful than a headline resolution without an installation context.
Plan Power and Audio Separately
The USB connection supplies power to the conversion electronics; it should not be described as a USB video input. Plan a suitable USB power source close to the assembly and follow the agreed product instructions. If the installation must keep a particular startup sequence or power-saving policy, include that requirement when discussing the sample setup.
Standard DVI is a video interface. Do not assume that an audio-capable DisplayPort monitor will receive sound through a DVI source. Where sound is required, identify a separate audio route or ask us to review the intended equipment and audio arrangement. A USB power lead alone does not establish USB audio support.
Make the Purchase Easier to Repeat
For an OEM program or replacement-cable order, a useful specification covers more than the product name. Record the approved model, cable route, end identification, target equipment, and packaging needs. Discuss custom length, identification, and packaging requirements with us so we can confirm feasibility and include scope in the quotation, rather than leaving it to the installation team.
You do not need a finished engineering document to start. Send a connector photo, equipment reference, or an existing sample, along with the quantity and display requirement. We can use that information to discuss the appropriate assembly and the details needed for production approval.












