x
Send Your Inquiry Today
Quick Quote
  • BC-DAF010-S straight adapter with a USB Type-E male plug and a USB Type-A female receptacle
  • Down Angle USB Type-E Male to USB 3.0 Female Adapter: 90-degree down-facing USB-A port for low-clearance installations.
  • Up Angle USB Type-E Male to USB 3.0 Female Adapter: 90-degree up-facing USB-A port for top-access or elevated connections.
  • USB Type-E to USB-A adapter shown at a motherboard connector for installation reference
  • Comparison of Up and Down angle adapters, illustrating their different use cases for cable routing.
  • Dimensional drawing of the 90-degree angled Type-E to USB 3.0 adapter, key for space-constrained integration.
  • Dimensional drawing of the straight Type-E to USB 3.0 adapter, showing overall size and port placement.
  • BC-DAF010-S straight adapter with a USB Type-E male plug and a USB Type-A female receptacle
  • Down Angle USB Type-E Male to USB 3.0 Female Adapter: 90-degree down-facing USB-A port for low-clearance installations.
  • Up Angle USB Type-E Male to USB 3.0 Female Adapter: 90-degree up-facing USB-A port for top-access or elevated connections.
  • USB Type-E to USB-A adapter shown at a motherboard connector for installation reference
  • Comparison of Up and Down angle adapters, illustrating their different use cases for cable routing.
  • Dimensional drawing of the 90-degree angled Type-E to USB 3.0 adapter, key for space-constrained integration.
  • Dimensional drawing of the straight Type-E to USB 3.0 adapter, showing overall size and port placement.
P/N: BC-DAF010

USB Type-E Male to USB-A Female Adapter

Bring a USB-A connection to a compatible internal Type-E motherboard socket without adding a cable loop. BC-DAF010 offers straight, down-angle, and up-angle bodies for different enclosure layouts.

  • USB Type-E male plug to one USB Type-A female receptacle.
  • Three models: BC-DAF010-S, BC-DAF010-D, and BC-DAF010-U.
  • Three compact body styles; choose the orientation to match your header and cable exit.
  • For USB data connections, confirm whether your motherboard and device support 5 Gbps or 10 Gbps.

Send a photo of the motherboard socket and nearby components. We can start the selection from there, even if your drawing isn’t ready.

Compact USB-A Access from an Internal Type-E Socket

A rigid adapter can be a useful choice when an internal USB-A device or cable needs to sit close to the motherboard. The BC-DAF010 series connects a compatible Type-E socket to a single USB-A female port. Choose a straight body when there is room along the insertion axis, or a 90-degree version when the cable must turn immediately.

This is an internal connector adapter, not a USB hub or an additional USB controller. It does not add ports or move the connection through a chassis panel on its own. For an accessible enclosure port, a Type-E-to-USB-A panel-mount cable may be a better starting point.

Specifications for Project Selection

ItemBC-DAF010 Series
Motherboard-side connectorUSB Type-E male, for a compatible internal Type-E female socket
Device-side connectorOne USB Type-A female receptacle
Body optionsStraight, down-angle and up-angle
HousingThe straight model lists an aluminum-alloy outer housing; confirm the construction of the selected angled version
Data-rate selectionUp to 10Gbps configuration available subject to confirmation for the selected model and complete connection; a 5Gbps host or device remains limited to 5Gbps
Legacy devicesUSB 2.0 and USB 1.1 operation depends on the host connection and device
PowerHost-supplied USB bus power; confirm the connected device load against the motherboard specification
IntegrationInternal installation; no supplied panel-mount fixing or independent power source

Compare the Three Body Styles

Part NumberStyleNominal Body SizeSelection Focus
BC-DAF010-SStraight27.3 × 14.7 × 7.2mmSpace in line with the header, including the mating USB-A plug
BC-DAF010-DDown-angle20 × 16 × 15mmHeader keying and clearance on the intended cable-exit side
BC-DAF010-UUp-angle20 × 16 × 15mmOpposite cable-exit orientation; check against the installed motherboard

Dimensions describe the adapter body, not the full installed envelope. Leave room for the USB-A plug, cable bend, and assembly access. Confirm the drawing before fixing a production enclosure layout.

Choose Your Type-E to USB-A Adapter

Compare the actual connector faces before choosing an angle. The same motherboard socket can point a cable toward very different components depending on its position and keying.

BC-DAF010-S straight adapter with a USB Type-E male plug and a USB Type-A female receptacle
Straight USB Type-E to USB-A Female Adapter

P/N: BC-DAF010-S

Choose the straight adapter when the motherboard socket has clear space along its insertion axis. Its compact body provides a direct USB-A connection without a cable loop. Before ordering, check the combined adapter and USB-A plug length against nearby drives, covers, and wiring.

Down Angle USB Type-E Male to USB 3.0 Female Adapter: 90-degree down-facing USB-A port for low-clearance installations.
Down Angle USB Type-E to USB-A Female Adapter

P/N: BC-DAF010-D

The down-angle body turns the USB-A connection by 90 degrees for a different cable exit. Use the product photo alongside your header photo to check keying and nearby components. This option suits layouts where a straight adapter would project into the available assembly space.

Up Angle USB Type-E Male to USB 3.0 Female Adapter: 90-degree up-facing USB-A port for top-access or elevated connections.
Up Angle USB Type-E to USB-A Female Adapter

P/N: BC-DAF010-U

The up-angle version offers an alternative 90-degree routing direction. It can help move a mating USB-A plug away from an obstruction when its orientation matches the header. Share an installed-view photo so the selected part is checked from the same perspective as your assembly.

Match the Header Keying Before Choosing an Angle

“Up” and “down” are only useful when everyone is looking at the connector from the same direction. In the comparison image, the beveled edge of the Type-E socket is the reference: the pictured inward-facing bevel is labeled PH741A, and the outward-facing bevel is labeled PH741B.

Use that visual reference together with the BC-DAF010 model photo, not as a universal motherboard naming rule. Send a close-up showing the full socket and its surroundings, plus an arrow for the desired cable exit. We can use it to review the intended variant before ordering a sample.

Also check access to the USB-A receptacle and clearance around the adapter body. A part that fits while the enclosure is open may still interfere with the cover or the mating cable after final assembly.

Comparison of Up and Down angle adapters, illustrating their different use cases for cable routing.
Does this adapter need its own driver?

The connector adapter doesn’t require a separate driver. Your motherboard’s USB controller and the attached device may still require operating-system support or their own drivers. Check those requirements if the device isn’t detected.

Can I use it as a USB-C laptop charger?

No. This model ends in a USB-A receptacle and is not a USB-C Power Delivery charging solution. Use a charging solution specified for the intended device and power source.

Can this adapter directly connect a monitor?

It does not provide native HDMI, DisplayPort, or USB-C DisplayPort Alt Mode output. A separate USB graphics device may use the USB data connection with its own software and system requirements. The adapter itself does not generate or convert a native display signal.

Will a 20Gbps Type-E header make the USB-A port run at 20Gbps?

No. A higher-rated motherboard header does not give this USB-A adapter a 20Gbps rating. USB 3.2 Gen 2×2 operation is not an advertised feature of BC-DAF010. Select and validate the adapter for the complete system’s supported connection mode.

Why might a USB 2.0 device fail even when a faster device works?

USB 2.0 uses a separate data pair from the SuperSpeed connection. Detecting a SuperSpeed device doesn’t prove the separate USB 2.0 path is working. Check the device on a known-good port, then review the motherboard header, adapter configuration, and any intermediate cable.

Can this adapter repair a damaged motherboard socket?

No. It requires an intact, correctly functioning Type-E socket. Bent contacts, a loose socket, or damaged board traces need appropriate repair or replacement. Don’t use an adapter to force a connection to a damaged header.

Can I install more than one adapter in the same computer?

Only if the computer has enough separate, compatible sockets and enough physical space. Each adapter occupies a header connection; it does not multiply the number of available host ports. Check shared controller bandwidth and the motherboard power budget when using several devices.

Can I stack additional right-angle adapters to change the direction again?

A stack may fit mechanically, but it adds connector interfaces and leverage on the motherboard socket. Do not assume the original data-rate or fit assessment still applies. A correctly oriented single adapter or a suitable cable is usually a cleaner starting point; if extra adapters are unavoidable, validate the final arrangement.

Is USB-IF certification or a compliance report included?

No certification or report should be assumed from this page or the connector name. If your purchase requires a USB-IF listing, material compliance documents, or a specific test report, specify the document and exact model when requesting a quotation so we can check availability before ordering.

How should I specify the adapter for repeat production orders?

Keep the approved sample reference, part number, and drawing revision together in your purchasing record. Include any agreed labeling, packaging, and inspection requirements. If the motherboard or enclosure changes, review the fit again rather than assuming that a previously approved angle will work in the new build.

Integrating a Type-E to USB-A Adapter into a PC or OEM Enclosure

The best adapter fits the finished assembly, not just the open motherboard on a bench. BC-DAF010 gives builders a short connection path for an internal USB-A peripheral or lead. A straight or angled body can simplify routing, as long as the connector stays accessible and the cable doesn’t pull against the motherboard socket.

Start with the motherboard connection

Locate the internal Type-E socket in the motherboard manual. It differs from a conventional USB 3.0 19-pin header, even though both serve front-panel connections. Check the specified USB generation, available bus power, and any header restrictions. A matching connector shape does not upgrade the controller behind it.

For data-rate planning, USB 3.0 commonly refers to a 5Gbps connection, while USB 3.1 Gen 2 and USB 3.2 Gen 2 describe 10Gbps operation. Tell us which rate your project needs so we can match the quoted variant to that requirement. The connected device and any additional cable must support the same rate; the adapter can’t make a slower host faster.

Check the installation with the cable attached

Compare the socket keying with the connector photos, then check the path of the actual USB-A plug. Include plug overmold length, cable bend space, and the position of covers, memory modules, and cooling hardware. A rigid adapter works best when the geometry is predictable. Where the header and enclosure port are separated, a flexible cable can make assembly and servicing easier.

Power down the equipment and disconnect its power source before fitting an internal header adapter. Follow the motherboard manufacturer’s handling guidance. Align the keyed connector without forcing it, support the cable, and keep conductive parts clear of exposed board contacts. Do not treat an internal header installation as a hot-plug operation.

Validate the application, not only device detection

For a production build, test the chosen adapter with the actual motherboard, device, cable, and enclosure. Check enumeration after a cold start, repeated data transfers, sleep and resume where relevant, and stability with the cover fitted. Record the negotiated connection rate separately from file-copy throughput, which also depends on the storage device and workload.

For equipment that will be moved or serviced often, review how the cable is supported and whether access is practical. The metal housing does not indicate a vibration rating, waterproof protection, or a specified service life. If your application needs these qualifications, define the acceptance criteria in your inquiry rather than assuming them from the product’s appearance.

Request a Variant Review and Quote

Send the motherboard model, a socket photo, your preferred cable-exit direction, the intended USB device, and your estimated order quantity. If you already have an enclosure drawing, include the available space around the header. If not, a marked-up photo is a useful starting point.

Ask for the selected part number, connector orientation, and agreed data-rate requirement to appear in the quotation or drawing. Confirm sample availability, lead time, packaging, and any special inspection requirements for your order. This gives your purchasing and assembly teams the same reference when moving from a trial build to repeat orders.

If your project needs a USB-C receptacle instead, compare the Type-E-to-USB-C adapter. For other internal-to-panel layouts, browse our USB Type-E cable and adapter family. You can also send photos of your connection for a quote.

Get an Instant Quote Now
Quick Quote

Discuss Your Connectivity Project

Scroll to Top