x
Send Your Inquiry Today
Quick Quote
  • Three variants of the USB 3.0 20-pin to Type-E adapter: Vertical, Down Angle, and Up Angle, for all internal routing needs.
  • BC-DAF012-S vertical adapter with a USB 3.0 19-pin female connector and a USB Type-E female receptacle
  • Down Angle USB 3.0 20-Pin Header to Type E Adapter: 90-degree downward-facing Type-E port for low-profile or bottom-access installations.
  • Up Angle USB 3.0 20-Pin Header to Type E Adapter: 90-degree upward-facing Type-E port for top-access routing in chassis.
  • Installation guide: Aligning and seating the adapter onto the motherboard's USB 3.0 20-pin header.
  • BC-DAF012 adapter installed on a motherboard USB 3.0 header, with a Type-E receptacle for the front-panel cable
  • Dimensional drawing of the adapter PCB, showing critical measurements for compatibility and space planning.
  • Three variants of the USB 3.0 20-pin to Type-E adapter: Vertical, Down Angle, and Up Angle, for all internal routing needs.
  • BC-DAF012-S vertical adapter with a USB 3.0 19-pin female connector and a USB Type-E female receptacle
  • Down Angle USB 3.0 20-Pin Header to Type E Adapter: 90-degree downward-facing Type-E port for low-profile or bottom-access installations.
  • Up Angle USB 3.0 20-Pin Header to Type E Adapter: 90-degree upward-facing Type-E port for top-access routing in chassis.
  • Installation guide: Aligning and seating the adapter onto the motherboard's USB 3.0 20-pin header.
  • BC-DAF012 adapter installed on a motherboard USB 3.0 header, with a Type-E receptacle for the front-panel cable
  • Dimensional drawing of the adapter PCB, showing critical measurements for compatibility and space planning.
P/N: BC-DAF012

USB 3.0 20-Pin Header to Type-E Adapter

Connect a compatible case’s Type-E front-panel lead to an available USB 3.0 motherboard header. BC-DAF012 offers vertical, down-angle, and up-angle versions so you can route the cable around your available space.

  • Motherboard side: USB 3.0 19-pin female connector in a keyed 20-position format.
  • Case-cable side: USB Type-E female receptacle.
  • USB 5Gbps connection when the host, cable, and device support it; no 10Gbps channel combining.
  • Models: BC-DAF012-S, BC-DAF012-B and BC-DAF012-A.
  • For internal front-panel data connections, not a new USB controller or a laptop-charging upgrade.

Send a header photo and your preferred cable direction for a model review and quote.

Connect a Type-E Case Lead to Your USB 3.0 Header

A front USB-C port can be useful even when the motherboard lacks a native internal Type-E socket. BC-DAF012 adapts a compatible USB 3.0 internal header to the Type-E plug on a front-panel cable, helping system builders use the case’s existing port without replacing the motherboard just for the connector.

The connection remains limited by the USB controller behind that header. With a USB 3.0 / USB 3.2 Gen 1 host, the target signaling rate is up to 5Gbps. The adapter does not combine two 5Gbps ports into a 10Gbps port. Type-E describes the internal connector format, not an automatic upgrade to USB 3.2 Gen 2.

BC-DAF012 Technical Overview

ItemSelection Reference
Motherboard-side connectorUSB 3.0 19-pin female, commonly described as a 20-pin header connector because one position is keyed
Front-panel connectorUSB Type-E female receptacle for the matching case cable plug
Data rateUp to 5Gbps on a compatible USB 3.0 host connection; actual throughput depends on the complete path
VariantsVertical, 90-degree down-angle and 90-degree up-angle
PowerHost-supplied USB bus power within the motherboard’s specified limits; no added USB-C PD capability
ConstructionCompact rigid adapter assembly with insulated housing
DimensionsConfirm the drawing for the selected variant; the pictured PH73A reference shows a nominal 27 × 25.5mm outline
UseInternal connection to a separate front-panel cable assembly

Model Selection

Part NumberBody StyleWhat to Check
BC-DAF012-SVerticalClearance above the motherboard header and room for the mating plug
BC-DAF012-B90-degree down-angleHeader keying, cable-exit direction, and neighboring components
BC-DAF012-A90-degree up-angleOpposite routing direction and access after the enclosure is assembled

If the board only provides a USB 2.0 internal header, consider the USB 9-pin to Type-E adapter instead. Its connection remains USB 2.0; these two adapter families are not interchangeable at the motherboard end.

Compare Vertical, Down-Angle and Up-Angle Models

Choose from three physical orientations. Match the keyed connector and the intended cable path to the product photos; an angle name alone is not a complete fit specification.

BC-DAF012-S vertical adapter with a USB 3.0 19-pin female connector and a USB Type-E female receptacle
Vertical USB 3.0 Header to Type-E Adapter

P/N: BC-DAF012-S

The vertical version is a straightforward choice when the header has open space above it. Check the adapter height with the Type-E cable inserted, not just the body. It suits assemblies where that cable can leave without pressing against the enclosure cover.

Down Angle USB 3.0 20-Pin Header to Type E Adapter: 90-degree downward-facing Type-E port for low-profile or bottom-access installations.
90-Degree Down-Angle USB 3.0 Header to Type-E Adapter

P/N: BC-DAF012-B

The down-angle version changes the front-panel cable’s exit direction by 90 degrees. It can help prevent obstructions when the connector keying matches the planned route. Compare your motherboard photo with this variant before choosing it for a tight chassis or repeat assembly.

Up Angle USB 3.0 20-Pin Header to Type E Adapter: 90-degree upward-facing Type-E port for top-access routing in chassis.
90-Degree Up-Angle USB 3.0 Header to Type-E Adapter

P/N: BC-DAF012-A

The up-angle version offers an alternative routing direction for the same adapter family. Use it where that orientation leaves room for the mating plug and cable bend. Share the board layout and desired exit direction to review fit before moving from a sample to production.

Use the Header You Already Have

The adapter provides a matching internal receptacle for the front-panel cable while retaining the existing USB host capability. On a USB 3.0 header, plan for a 5Gbps connection rather than a 10Gbps upgrade.

This makes sense when the case already has a USB-C data port, and the motherboard otherwise meets the project’s needs. If 10Gbps is essential, choose a host connection or controller that provides it instead of changing the connector shape.

BC-DAF012 adapter installed on a motherboard USB 3.0 header, with a Type-E receptacle for the front-panel cable
Three variants of the USB 3.0 20-pin to Type-E adapter: Vertical, Down Angle, and Up Angle, for all internal routing needs.

Choose the Cable Exit That Fits

Vertical, down-angle, and up-angle bodies offer different ways to exit the motherboard header. Choose the style based on the socket orientation, nearby hardware, and where the front-panel cable must run.

A short, unobstructed route is easier to assemble and service. Check the keyed side of the header and the connector face in the model photo before specifying an angle. A marked-up installation photo can be more useful than an “up” or “down” description on its own.

Support the Cable, Protect the Header

The compact, insulated body keeps the connector assembly together, with no loose cable segment between the two interfaces. It works best when the mating position is fixed and predictable.

Support the front-panel cable so its weight and bend do not load the motherboard socket sideways. A rigid body does not indicate vibration or lifetime rating. For equipment with repeated servicing or unusual mechanical demands, define retention and inspection requirements as part of the project review.

BC-DAF012-S vertical adapter with a USB 3.0 19-pin female connector and a USB Type-E female receptacle
Installation guide: Aligning and seating the adapter onto the motherboard's USB 3.0 20-pin header.

Install with the System Powered Down

Power down the computer, disconnect its power supply, and follow the motherboard manufacturer’s handling instructions. Locate the correct USB 3.0 header, align the keyed connector, and seat the adapter. Do not force it onto offset pins or a different internal header.

Fit the Type-E cable plug, secure the route, and check clearance with the enclosure closed. After reassembly, test the front port with the intended device. No separate adapter driver is required, but the host controller and peripheral still need normal operating-system support.

Check the Drawing Before Final Assembly

The illustrated PH73A reference shows a 27 × 25.5mm outline. Treat that as a reference for the pictured version, not as a complete drawing for all three models. Confirm the variant-specific body dimensions and installed height before approving a panel or board layout.

For an OEM inquiry, provide the motherboard model, a header photo, and the required cable-exit direction. Add any clearance limit, quantity, or inspection requirement you already know. A preliminary photo is enough to start; we can agree on the final drawing once we identify a suitable configuration.

Dimensional drawing of the adapter PCB, showing critical measurements for compatibility and space planning.
Up Angle USB 3.0 20-Pin Header to Type E Adapter: 90-degree upward-facing Type-E port for top-access routing in chassis.

Put the Front USB-C Data Port to Work

A case’s front USB-C port can be more convenient than a rear connection for occasional data access and suitable USB peripherals. BC-DAF012 lets you use that port when the board has a compatible USB 3.0 header but no native Type-E socket.

Choose this adapter when it meets your workload needs. For native display output, high-power charging, or a faster data link, review the full system requirements instead. Explore the USB Type-E cable and adapter range if you need a different routing format.

What data rate should I expect?

On a compatible USB 3.0 motherboard header, the connection supports up to 5Gbps signaling. Real file-transfer throughput is lower and depends on the device, cable, and host. This adapter does not combine two USB 3.0 channels to create a 10Gbps connection.

Do I have to install drivers for the adapter?

The adapter doesn’t need a separate driver. Your operating system must still support the motherboard’s USB controller and the connected peripheral. If the device isn’t detected, check the controller settings and drivers, as well as the physical connection.

Which motherboards support this adapter?

Check for an available internal USB 3.0 header with the matching keyed 19-pin/20-position layout. Also verify the motherboard manual, front-panel cable pin assignment, and physical clearance. Matching the connector shape alone does not establish compatibility with every proprietary board.

How do I choose between the three body styles?

Choose the orientation that lets the Type-E lead leave the header without pulling against nearby components. Compare the keyed connector face in the model photos with your motherboard, then check clearance with the plug fitted.

Which dimensions should I check?

The PH73A drawing shown on this page gives a nominal 27 × 25.5mm outline. It does not specify every dimension for all three variants. Request the drawing for your selected part number, including installed height and mating-plug clearance, before fixing the enclosure layout.

Is it suitable for industrial use?

It can be considered for an internal front-panel connection in industrial PCs, but you must review the application’s temperature, vibration, service, and compliance requirements separately. The compact housing does not indicate a specific environmental rating.

Does this adapter add USB-C Power Delivery?

The connection uses power supplied by the motherboard header within its specified limits. The adapter does not add USB-C Power Delivery negotiation or turn a front-panel port into a laptop charger. Check the intended peripheral’s demand against the motherboard’s available USB power.

Can you provide compliance documentation for my order?

Please identify the documents required for your market or purchasing process when requesting a quote. Ask for documentation applicable to the selected part and supply configuration; a general factory certificate does not, by itself, certify every adapter model.

Can I request a custom adapter configuration?

Send the proposed change, mating-interface details, quantity, and any drawing or inspection requirements for a feasibility review. Agree on connector routing and housing requirements with a specific design; don’t treat an arbitrary pin change as compatible with a standard motherboard header.

How do I confirm warranty and support terms?

Request the applicable warranty terms, sample availability, and order-specific support arrangements with your quotation. Include the motherboard, front-panel cable, and connected device details if you need help reviewing the installation. Commercial terms should be confirmed for the actual order.

What should I test before ordering adapters for a fleet of PCs?

Try the selected variant on a representative motherboard and case first. Check seating, cable clearance, device detection, and file transfers with the actual front-panel cable. Test both orientations of the external USB-C plug. Confirm the port reliably powers the intended peripheral and that the assembly remains accessible for servicing. Keep the accepted configuration as the reference for repeat orders.

How to Specify a Front USB-C Connection Without Overbuilding the PC

Start with what users will connect, not with the newest connector name. A front port for occasional file transfers and standard USB peripherals serves a different role than a port expected to drive a display or charge a laptop. BC-DAF012 addresses the first type of connection: an internal USB 3.0 header linked to a compatible Type-E front-panel lead.

Separate the connector decision from the speed decision

The case cable may fit a Type-E receptacle, but the motherboard controller determines the available USB data capability. Reusing a 5Gbps header can be a sensible choice when that rate suits the work. If the project requires 10Gbps, choose the appropriate host hardware rather than assuming this adapter can supply the missing bandwidth.

Approve the installation as an assembly

A body that fits by itself may become awkward once you attach the Type-E plug and cable. Review the complete assembly beside the GPU, memory, cooling hardware, and enclosure panels. Leave a natural cable route and avoid using the adapter as a lever when moving the cable. The three BC-DAF012 orientations give you routing options, but the best choice depends on the keyed header position.

Make a sample decision repeatable

For a fleet upgrade or OEM build, record the motherboard revision, case cable, selected adapter model, and acceptance checks. Test with a representative peripheral and workload before ordering the production quantity. If the installation needs a flexible lead rather than a rigid body, compare the routing formats in our USB Type-E range.

Send the information you already have

You do not need a finished engineering pack to start a discussion. A clear header photo, the case or front-panel cable model, and the cable exit direction are useful first inputs. Add the intended quantity and any clearance or documentation requirements. Then we can review the right variant and quotation scope without assuming capabilities the host doesn’t provide.

Get an Instant Quote Now
Quick Quote

Discuss Your Connectivity Project

Scroll to Top