Active USB Printer Cable
- USB-A male to USB 2.0 Standard-B male.
- Integrated active signal booster.
- Listed lengths: 5, 10, 15, 20, and 30 m.
- Transparent black cable construction.
- Designed for longer host-to-printer cable routes.
- Power arrangement reviewed for your selected configuration.
Long-Reach USB-A to USB-B Connection
Active USB Printer Cable for Longer Equipment Connections
Put your printer where the work happens, even when the computer needs to stay farther away. Our active USB printer cable combines USB-A and USB-B connectors with an integrated signal booster for longer cable routes in print stations, retail counters and equipment installations.
BC-DAB008 is offered in several listed lengths, from 5 m to 30 m. To select the right version, start with your printer model, host connection, and required route. Send those details with a rough layout, and we can review a suitable configuration for sample evaluation or bulk supply.
Product Specifications
| Item | Configuration |
|---|---|
| Product reference | BC-DAB008 |
| Host connector | USB 2.0 Type-A male |
| Device connector | USB 2.0 Standard-B male |
| Construction | Active cable with integrated signal booster |
| Listed length options | 5 m, 10 m, 15 m, 20 m and 30 m; application review required |
| Color | Transparent black |
| Interface | USB 2.0 High-Speed, up to 480 Mbps signaling rate |
| Power arrangement | Confirmed for the selected cable and connected equipment |
A listed length is not a guarantee of performance with every printer or host. The interface rate describes USB signaling, not actual print speed. For shorter direct connections, compare the passive USB printer cable.
More Freedom to Position Your Printer
A longer direct USB connection lets you keep the host computer in a protected or convenient location while keeping the printer within the operator’s reach. The integrated booster makes this a different construction from a passive extension lead.
For a counter, label station, or enclosed equipment build, share a sketch of the route and the space available around the booster. We can discuss a listed length and power arrangement for your setup, then use a sample to verify the full connection before you commit to a larger order.
Ask us to quote the lengths you want to compare, with the required quantity for each. Sample availability and cost will be confirmed for those configurations. Testing the proposed lengths on the same equipment gives you a more useful comparison than choosing only from a catalog description.
Please request the complete supply scope for your selected version. The quotation should identify whether auxiliary power is required and whether an appropriate adapter is included or supplied separately. An adapter pictured with one configuration should not be assumed to be included with every length.
No. This is a host-to-device USB cable, not a printer-sharing server or network adapter. If several computers need access to one printer, use a sharing method supported by the printer and your IT setup. Adding an active cable does not create network connectivity.
Send the cable reference and length, host and printer models, operating system, connection layout, and a description of when the fault occurs. Note whether the printer works with a short, known-good cable. Photos of the booster and power connections, plus any error messages, help us narrow down the issue.
Request the applicable warranty, claim procedure, and replacement terms with your quotation. These should be agreed upon for the supplied configuration before purchase. Keep the order reference and product identification so that a later support request can be matched to the correct cable version.
Plan a Long USB Printer Connection That Fits Your Workflow
Moving a printer can make a counter or production station easier to use. Plan the cable route around that workflow, while keeping the booster and connections accessible for installation and servicing.
Describe the complete connection
Tell us which computer or controller will act as the USB host, which printer will connect at the other end, and whether a hub or docking station sits between them. A direct host port and a connection through several hubs are different test conditions. Include the operating system and printer driver when requesting a sample for an established installation.
Measure the installed route
Follow the actual cable path through furniture, trays, or equipment rather than measuring the distance across the room. Leave practical service slack, but avoid adding unnecessary extensions. Keep the inline module accessible and protect it from pulling loads. This product should not be treated as outdoor, waterproof or continuous-flex cable without an agreed construction and rating.
Review power separately from signal reach
An active booster addresses the USB signal path; it does not establish the power budget of the whole installation. Even a printer with its own mains supply still interacts with the USB connection. Provide details of any auxiliary power input shown on your proposed cable, and obtain the correct supply requirements before connection. Do not connect an arbitrary adapter merely because its plug fits.
Test the work you actually perform
Run representative documents or label jobs at the intended cable length, using the production host and printer. Include repeated jobs, device reconnection, and the sleep or restart behavior used at your site. For a multifunction printer, also test scanning and status reporting if those functions matter. Record any disconnections or recognition failures rather than relying only on a successful first print.
Make rollout and troubleshooting easier
Keep the approved cable configuration and test setup with your purchasing record. If a later installation behaves differently, compare the host port, hubs, software, and power arrangement before assuming the cable length is the only cause. For multiple sites, share the different equipment combinations so the sample plan reflects the real deployment.
Not sure which construction you need? Browse the USB-B cable range, or send us the printer model and approximate distance. We can start with those details and agree on the remaining requirements.
