eSATAp
Choose an eSATA data-and-power path that matches the source you actually have. BC-DAH003 includes powered eSATA, USB-assisted, and LP4-fed SATA drive connections, plus a reference for a powered eSATA male-to-male cable.
- A: powered eSATA plug to a combined 22-pin SATA drive socket.
- B: eSATA data plug plus USB-A power branch to a 22-pin SATA drive socket.
- C: eSATA data plug plus LP4 peripheral power branch to a 22-pin SATA drive socket.
- D: powered eSATA male plugs at both ends; not a direct 22-pin drive connection.
- Power depends on the source port, available rails, and approved load; 5V-only and 5V/12V sources are not interchangeable.
- Passive assemblies: no USB-to-SATA protocol conversion or unverified voltage conversion.
Product Details
The useful question is not simply whether an eSATAp cable carries power. It is where that power comes from, which rails are available, and whether they suit the drive. The BC-DAH003 family offers four physical layouts so an equipment builder can select the right connection path instead of assuming every powered-eSATA port is equivalent.
Three references terminate in a combined 22-pin SATA drive socket. The fourth has powered-eSATA plugs at both ends. These are passive cable arrangements, not USB storage bridges or power supplies that generate a missing voltage.
Start with the Available Power Source
| Model | Layout and required source |
|---|---|
| BC-DAH003-A | Powered eSATA plug to 22-pin SATA female; verify host-port rails and load capacity |
| BC-DAH003-B | eSATA data plus USB-A power branch to 22-pin SATA female; USB source contributes 5V |
| BC-DAH003-C | eSATA data plus LP4 male power branch to 22-pin SATA female; approve peripheral-source 5V/12V wiring |
| BC-DAH003-D | Powered eSATA male-to-male cable; confirm both endpoints, contacts, and supply direction |
The A reference photograph shows no DC barrel socket. Do not order it as a 5.5×2.1mm adapter-input cable or assume an AC adapter is included. The B and C references have visibly separate power branches; D is not a female-to-female adapter and does not plug directly into a standard 22-pin SATA drive interface.
Connection and Build Specification
| Item | Selection basis |
|---|---|
| Data | eSATA/SATA signal path; up to 6Gbps nominal with compatible equipment and the agreed configuration |
| Drive end A/B/C | Combined 22-pin SATA female socket for compatible drive-side data and power |
| Drive power | Only the rails supplied and correctly wired through the selected source path |
| USB branch B | Power branch, not a USB data bridge; do not assume 12V drive supply |
| LP4 branch C | Conventional peripheral input; confirm supply/pinout and required 5V/12V load |
| Length | A reference drawing shows 50cm; specify model-specific total and branch lengths |
| Current and materials | Approve complete assembly, source capacity, and required documentation; no universal per-rail rating implied |
5V and 12V Are Different Requirements
Powered eSATA ports exist with different power supply arrangements. A 5V-only source is not a substitute for a source that must supply both 5V and 12V. Check the exact computer, bracket, or enclosure specification and the drive documentation; do not choose based on the words “desktop,” “laptop,” or “power eSATA” alone.
Many 2.5-inch SATA drives use 5V, while common 3.5-inch HDDs need both 5V and 12V, including adequate start-up current. Use the actual drive specification rather than size as the final approval. USB-A power assistance does not by itself establish a 12V rail, and a passive cable cannot correct an inadequate source.
The source, contacts, conductors, and branch layout must together support the required load. Do not connect independent supplies to the same rails without an approved design that defines isolation and backfeed protection. A powered port and a supplementary power branch must not be treated as permission to combine sources arbitrarily.
Keep USB Power Separate from USB Data
On B, the eSATA path carries the storage data and the USB-A branch is for power assistance. It does not let a USB-only computer control a SATA drive through this passive cable. For that workflow, compare the active USB-host to eSATA-storage bridge or a suitable USB-to-SATA adapter with the correct drive-power provision.
Check the Key, Clearance and Length
Compare the powered eSATA plug profile with the source receptacle, including the contacts needed for your supply variant. At the drive, check the combined 22-pin mating interface and nearby hardware. This is not a direct connector for M.2 NVMe, mSATA, SAS, or Slimline SATA drives.
The A-model reference drawing shows an overall length of 50cm and several connector-body dimensions. Confirm those dimensions for the ordered revision; do not apply them automatically to all four layouts. For B and C, specify the data route and power-branch length separately so neither connection pulls on the drive socket.
Approve a Repeatable Connection
Send source and drive models, clear connector photos, required rails and operating/start-up load, route dimensions, and quantity. Include the source pinout for any nonstandard power connection. BespokeCable can review the appropriate layout, samples, and documentation needs with you before you place a production order. Confirm the drawing, component specification, validation scope, and commercial terms; a familiar connector name is not evidence of a completed electrical test.
Choose the Data and Power Route
These four references use different source connections. Select the actual power path first, then check the drive end, available rails, load, and dimensions. Do not apply one model’s supply capability to every cable in the family.

P/N: BC-DAH003-A
The A reference joins a powered eSATA plug to a combined SATA drive socket without a separate power branch in the photo. Confirm the source port’s available rails and capacity against the drive requirements. No DC barrel input or included AC adapter is shown in this configuration.

P/N: BC-DAH003-B
The B reference separates eSATA data from a USB-A power branch before the combined SATA drive socket. Confirm the 5V source capacity, drive load, and approved wiring. USB is not the data path here, and the added plug does not establish a 12V supply for a 3.5-inch HDD.

P/N: BC-DAH003-C
The C reference adds an LP4 male peripheral-power branch to the eSATA data connection. Review the source pinout, required 5V and 12V rails, and full drive load, including start-up. This is not a generic modular PSU cable; an apparently matching PSU socket does not establish electrical compatibility.

P/N: BC-DAH003-D
The D photograph shows powered eSATA male plugs at both ends, with additional side contacts visible. Specify the source and destination, required rails, and supply direction before selection. It is not a direct 22-pin SATA drive lead, a voltage converter, or a way to combine two independent power sources.
A Separate LP4 Power Branch Is a Different Configuration
The C-model photo shows the eSATA data plug, a conventional four-position LP4 male power plug, and the combined 22-pin SATA drive socket. Data and supply arrive through separate branches.
Confirm the peripheral source’s pin assignment and available 5V/12V load before connecting the drive. The photograph identifies the physical layout; it does not establish a universal current rating, an approved modular-PSU pinout, or power conversion inside the cable.

Standard eSATA is a data interface. Powered eSATA/eSATAp combines data and power contacts in a compatible port and cable arrangement. Different powered variants use different rails; the name alone doesn’t guarantee both 5V and 12V.
The A-model reference shows no DC barrel input or separate AC adapter. It connects a powered eSATA plug to a 22-pin SATA drive socket. Confirm the source port, available rails, and ordered bill of materials instead of assuming a 5.5×2.1mm supply connection.
Do not assume so. A USB-A power branch contributes 5V and does not, by itself, provide the 12V required by common 3.5-inch HDDs. Review the actual drive specification, supply path, and approved assembly before use.
C has the pictured LP4 male peripheral-power branch alongside the eSATA data lead. Confirm the conventional source pinout, required rails, and load. A modular PSU’s equipment-side connector must not be treated as interchangeable without the PSU manufacturer’s approval.
No USB-to-SATA protocol bridge is specified for B. Its USB branch is for power assistance; storage data remains on the eSATA connection. A USB-only host needs a compatible active bridge rather than this passive, power-assisted cable.
It combines the standard seven-contact SATA data connection and fifteen-contact power connection in a compatible drive. This physical interface does not imply that every possible supply rail is wired or available. Confirm the source and assembly pinout.
The photo shows powered eSATA male plugs at both ends, rather than a 22-pin drive socket. Confirm the mating ports, required rail contacts, and supply direction. It is not a power supply or an adapter for joining independent sources.
No universal regulator or per-rail current rating should be assumed. These passive layouts require the correct source rails, capacity, wiring, and components for the drive. Agree on the assembly rating and any load/thermal verification for the actual build.
Provide the model, required total length, connector measurement points, and separate power-branch length, where applicable. The A reference drawing shows 50cm; we review custom feasibility, materials, and complete-system performance for the requested configuration.
No. The controller, firmware, drive, and operating system determine which connection behaviors are supported. Follow their instructions and safely unmount or eject storage when needed. A passive cable does not add hot-plug or RAID support to an incompatible host.
Send source and drive models, available rails and pinout, operating/start-up load, connector photos, lengths, and quantities. Include any test records, material declarations, labeling, and packing requirements. Confirm sample terms, minimum quantity, and production timing for the agreed configuration.
Specifying Powered eSATA Without Mixing Up Supply Paths
For a bench setup or embedded storage design, begin with a power-source record. A cable that fits can still be wrong if the drive expects a rail or starting current the source does not provide.
Identify the Exact Source Variant
Record the host or bracket model and its powered-eSATA specification. Check whether 5V alone or 5V and 12V are available, which contacts carry them, and what load is permitted. For a separate USB or LP4 branch, identify that supply just as carefully. Do not assume connector appearance or computer type establishes the electrical capability.
Read the Drive’s Requirements
Use the drive documentation for rails, polarity, and operating/start-up load. The 22-pin connector combines seven data contacts and fifteen power contacts, but a cable routes only what is wired and supplied. It does not generate 3.3V, 5V, or 12V from an absent source.
Prevent Conflicting Power Feeds
Define which source powers each rail and whether any alternative input is isolated. Never connect independent supplies to common power contacts as an improvised way to increase capacity. Where the source or pinout is uncertain, do not energize the assembly until the connection is reviewed.
Measure the Data and Power Branches
Give the total drive route, exposed branch lengths, and connector reference points. A power lead that reaches only under tension can load the combined drive socket even if the data lead has slack. Include a service allowance and support for any bare drive or external connection.
Evaluate the Complete Sample
With power isolated, check continuity, polarity, and mechanical fit against the approved drawing. Then evaluate the intended drive and host under an agreed test scope, including relevant start-up and operating conditions. Do not infer a finished test result from the connector name or a product photograph.
Keep Data Safe During Setup
Follow the equipment’s connection sequence and hot-plug guidance. Safely eject or unmount storage before disconnecting when required. Do not initialize or format an existing drive simply because it is not recognized; check supply, host support, and connection details first.
Send the source specification, drive model, and route sketch through the inquiry form. If you only need a standard external data link, the eSATA-to-eSATA data cable is a separate option and still requires storage power.









